• Home
• FEA
  • FEA Introduction
  • FEA General Notes
    • Heat Exchanger Tubes with Springs
    • Creating NPT Connections
    • Simplification with Symmetry
    • Simplification of Multi-Body Models
    • FEA Reaction Forces
    • Nuts & Bolts of Stress Linearization
    • Stress Classification Lines
    • Error Plots - Bolt Heads
    • Large Displacement Solutions
    • Factory Default Material Properties
    • Bloating Files
    • When is FEA Required?
    • Presentation Screen Shots
  • FEA Mesh Notes
    • Reduce Mesh Time
    • Mesh Tolerance Settings
    • Mesh Refinement
    • Refinements Near Discontinuities
    • 2nd Order Integration Elements
    • Surface Model Mesh Challenges
    • Easier Surfaces
    • Solid Model Mesh Challenges
    • Solution for Mesh Time of Shells
  • FEA Documentation
• ASME Calcs
  • ASME Calculations
  • ASME Comments
    • Type (3) Welds
    • External Pressure
    • Discontinuity Stresses
    • Design Code used in Repair...
    • Loads on Flanges
    • Origins of Replacement Rules
    • Use of 44W Materials
    • Weld Efficiencies
    • Lethal Service - Quick Guide
    • Unlisted Materials
    • Flanged and Flued
    • Hand Calculations
    • ASME VIII-1 Nozzle F Factor
  • Design Charts
  • Design Tools
• CRN
  • CRNs - Overview
    • Quick Facts
    • Do I Need a CRN?
    • Do I Need a Statutory Declaration?
    • More About CRN Numbers
    • Applying in Multiple Jurisdictions
    • Provincial Review Times
    • Author's Opinion
  • Fittings - Do I need a CRN?
  • Piping - Do I need a CRN?
  • FAQs
  • Provincial Contacts
  • CRN User's Survival Guide
• Solid Model
• Burst Test
  • Burst Testing Introduction
  • Burst Testing General
  • Burst Testing Common Problems
• Samples
• About PVEng

Piping System

File: PVE-Sample12
Last Updated: Oct. 17, 2008
JL

This is a basic piping system. Registration documentation consists of a calculation set and a P&ID drawing. The drawing must outline the piping layout, materials, design data, and CRN's for the fittings and valves used in construction. Specific notes regarding the installer, pipe hangers, location of pressure valves, etc. may be required as well.

Downloads (pdf format):

• Spreadsheet Calculations
• Drawing

More Samples

(c)2012 Pressure Vessel Engineering Ltd.