|
British Columbia |
BC Safety Authority Suite 400 - 88 6th Street 88-6th Street New Westminster, BC V3L 5B3 Contact: Maureen Gauthier Toll free: 1-866-566-SAFE (7233) Phone 604-660-6286 Fax 604-660-6215 BCSA web site Fees vary - see B.C. Fee Schedule B.C. application form must be used for all registrations. B.C. statutory declaration form (and guide) must be used for fitting registrations. British Columbia Act - revised April 2004 Registration Requirements: Pressure Vessel - 1 set of drawings with P.Eng stamp, 1 set of design calculations Fitting - 1 set of drawings, 1 set of design calculations and 1 original notarized statutory declaration form. |
|
Alberta |
Alberta Boilers and Safety Association 9410-20 Avenue Edmonton, Alberta Canada, T6N 0A4 Contact: Design Survey Phone 780-437-9100 Fax 780-437-7787 ABSA web site Fees vary by size and complexity of the vessel Fee Schedule Alberta application form must be used for all registrations. Alberta statutory declaration form must be used for fitting registrations. Alberta does not always require a P.Eng. stamp on submissions - call the above number for details. Registration Requirements: Pressure Vessel - 2 sets of drawings, 1 set of design calculations Fitting - 2 sets of drawings, 1 set of design calculations and 2 original notarized statutory declaration forms. Note: ABSA will accept drawings without a P.E. Stamp for fittings and U stamp vessels, however a stamp is required for Division 2 designs. Officially, if a stamp is required, vessel drawings must be stamped by an Alberta professional engineer. This rule is not enforced. |
|
Saskatchewan |
Government of Saskatchewan Corrections and Public Safety Licensing and Inspections Boiler and Pressure Vessel Safety 330-1855 Victoria Avenue Regina, SK Canada S4P 3V7 Contact: John Gosselink 306-787-4524 Contact: Chris Selinger 306-787-5905 Contact: Brian Krasiun 306-787-4514 Fax 306-787-9273 Fees start at $130 - Fee Schedule Allow one month for application Application form for the Registration of Designs Saskatchewan statutory declaration form Registration Requirements: Pressure Vessel - 2 sets of drawings with P.Eng stamp, 1 set of design calculations Fitting - 2 sets of drawings, 1 set of design calculations and 1 original notarized statutory declaration form. |
|
Manitoba |
Manitoba Labour and Immigration Workplace Safety and Health Division 500-401 York Avenue Winnipeg, Manitoba Canada, R3C 0P8 Contact: Madhav Sinha 204-945-3446 Fax 204-945-4556 Manitoba website Typical fees $100-125 - Fee Schedule This Manitoba application form must be used for all boiler, pressure vessel and heat exchanger registrations. Additional forms are available for fittings and piping. Manitoba statutory declaration form Registration Requirements: Pressure Vessel - 2 sets of drawings with P.Eng stamp, 2 sets of design calculations Fitting - 2 sets of drawings, 2 sets of design calculations and 2 original notarized statutory declaration forms. |
|
Ontario |
Technical Standards and Safety Authority 14th Floor, Centre Tower 3300 Bloor Street West Toronto, Ontario Canada, M8X 2X4 Phone: 416-325-2000 Fax 416-231-5366 Contact: Cathy Turylo 416-734-3440 TSSA website Fees $138/hour for regular service - 3-4 week turnaround - Fee Schedule Fees $276/hour for rush service - 1 week when available Ontario application form must be used for all registrations Ontario statutory declaration form must be used for all fitting registrations Registration Requirements: Pressure Vessel - 2 sets of drawings with Ontario P.Eng stamp, 1 set of design calculations Fitting - 2 sets of drawings, 1 set of design calculations and 2 original notarized statutory declaration forms. Pressure vessel drawings must be stamped with an Ontario professional engineer's stamp. This rule is enforced by the TSSA. |
|
Quebec |
Service de l'inspection de la fabrication D'appareils sous pression 545, boulevard Crémazie est, 4 ème étage Montréal, Quebec Canada, H2M 2V2 Phone: 514-873-6459 or 1-866-262-2084 Fax: 514-873-9936 Contact: Rene Plante, Gilles Corbin, Christian Fortier La Régie du bâtiment website English: Pressure Vessels Page Fees $139 up front for the first hour of review as of April 1, 2009 Pay $65 for each additional half-hour or fraction thereof, payable after the job is done Allow 3-4 weeks for review Many of the employees are bilingual in French and English. Registration Requirements: Note: Officially, vessel drawings must be stamped by a Quebec professional engineer. This rule is not enforced. Pressure Vessel - 3 sets of drawings with P.Eng stamp, 1 set of design calculations Fitting - 3 sets of drawings with P.Eng stamp, 3 original notarized statutory declaration forms and 1 set of design calculations or test data. |
|
New Brunswick |
See ACI Central $30 Provincial fee + ACI |
|
Nova Scotia |
See ACI Central $30 Provincial fee + ACI Nova Scotia Act |
|
Prince Edward Island |
See ACI Central $40 Provincial fee + ACI Prince Edward Island Act |
|
Newfoundland and Labrador |
See ACI Central $50-350 Provincial fee depending on size of vessel + ACI Newfoundland and Labrador Act |
|
Yukon |
See ACI Central $25 Territory fee + ACI |
|
North West Territories |
See ACI Central $50-150 Territory fee depending on vessel + ACI |
|
Nunavit |
See ACI Central $30 Territory fee + ACI |
|
ACI Central |
ACI Central, Inc. 20 McAuley Court Charlottetown, PE Canada C1A 9M7 Contact: Duane Gallant/Tammy Thomas Phone: 902-566-1975 Fax: 902-566-3133 ACI website See Province or territory for fees Standard Review fee of $250 + provinces / territories fee Ask about review rates if your project is complicated. One review fee applies to all Provinces / Territories covered by ACI Central Allow 10 working days for review. A Professional Engineer's stamp is required, but does not have to be Canadian. A purchase order and cover letter with contact information is required before review will start. ACI Pressure Vessel Registration Application ACI Pressure Vessel Registration Form (Design Information) Registration Requirements: Pressure Vessel - 2 sets of drawings with P.Eng stamp, 1 set of design calculations, Pressure Vessel Registration Form (Design Information). Fitting - all except Newfoundland - 2 sets of drawings, 1 set of design calculations and 1 original notarized statutory declaration form. Fitting - Newfoundland - 2 sets of drawings with P.Eng stamp, 1 set of design calculations and 2 original notarized statutory declaration forms. |
Advertisement:Pressure Vessel Engineering's staff can assist you with all aspects of the CRN registration process including calculations, drawings, finite element analysis, burst testing and registration paperwork. Our team is experienced with over 1200 CRNs registered since 1999 and over 400 in 2008 alone. PVEng also provides complete vessel code calculations for ASME Section 1, 4 and 8 (Div 1 and 2) as well as B31.1 and 31.3. We can use finite element analysis to analyze pressure vessels or components and provide solid modeling services. PVE has designed vessels ranging from small filter vessels to large pressure treating cylinders. |
|
Pressure Vessel Engineering Limited 120 Randall Drive, Suite B Waterloo, Ontario, Canada N2V 1C6 |
Phone - (519) 880-9808 Fax - (519) 880-9810 |
