Provincial Contacts and Requirements
|
British Columbia |
BC Safety Authority B.C. Safety Authority Suite 200 - 505 Sixth Street New Westminster, B.C. V3L 0E1 Toll free: 1-866-566-SAFE (7233) Phone 604-660-6286 Fax 604-660-6215 BCSA web site Fees vary - see B.C. Fee Schedule - expedited and rush service available B.C. application form must be used for all registrations. B.C. statutory declaration form (and guide) must be used for fitting registrations. British Columbia Act - revised April 2004 Summary of Registration Requirements: Pressure Vessel - 1 drawing with P. Eng. stamp, design calculations, application form. Fitting - 1 set of drawings, 1 set of design calculations and 1 original notarized statutory declaration form, application form. Piping - 2 sets of drawings with P. Eng. Stamp, 1 set of design calculations, application form Rates: Standard - $162/hour 6-10 weeks typically Expedited - $325/hour 1-6 weeks typically Rush - $500/hour 5 days typically |
|
Alberta |
Alberta Boilers and Safety Association 9410-20 Avenue Edmonton, Alberta Canada, T6N 0A4 Contact: Design Survey Phone 780-437-9100 Fax 780-437-7787 ABSA web site Fees vary by size and complexity of the vessel Fee Schedule. Expedited service is sometimes available. Alberta application form must be used for all registrations. Alberta AB-31 statutory declaration form must be used for fitting registrations. Summary of Registration Requirements: Pressure Vessel - 2 sets of drawings, 1 set of design calculations, AB-31 application form Fitting - 2 sets of drawings, 1 set of design calculations and 2 original notarized statutory declaration forms, AB-31 application form. Piping - 2 sets of drawings with P. Eng. Stamp, 1 set of design calcs, AB-31 application form, AB-96 piping application form (see guide to filling out AB-96 form). Rates: ABSA has a rate schedule, however surveys are charged out by the hour: $136/hour 5-16 weeks typically. |
|
Saskatchewan |
Codes and Standards Compliance Office Boiler and Pressure Vessel Safety Board Technical Safety Authority of Saskatchewan 330-1855 Victoria Avenue Regina, SK Canada S4P 3T2 Toll-free: 1-866-530-8599 Regina: 306-787-1443 Fax 306-787-9273 TSASK Website
Boiler and Pressure Vessel Safety Forms Application form for the Registration of Designs Saskatchewan statutory declaration form Summary of Registration Requirements: Payment is required up front, see fees. - Expedited and rush services are available. Pressure Vessel - 2 sets of drawings with P.Eng stamp, 1 set of design calculations Fitting - 2 sets of drawings, 1 set of design calculations, application form and 1 original notarized statutory declaration form. Rates: Standard - $135/hour 12+ weeks typically Expedited - $435 base 10 days Rush - $835 base 3 days |
|
Manitoba |
Manitoba Labour and Immigration Workplace Safety and Health Division 500-401 York Avenue Winnipeg, Manitoba Canada, R3C 0P8 General Inquiries 204-945-3373 Fax 204-945-4556 Manitoba website This Manitoba application form must be used for all boiler, pressure vessel and heat exchanger registrations. Additional forms are available for fittings and piping. Manitoba statutory declaration form Summary of Registration Requirements: Pressure Vessel - 2 sets of drawings with P. Eng. stamp, 1 set of design calculations, application form Fitting - 2 sets of drawings, 2 sets of design calculations and 2 original notarized statutory declaration forms, application form. Rates per schedule 8+ weeks |
|
Ontario |
Technical Standards and Safety Authority 14th Floor, Centre Tower 3300 Bloor Street West Toronto, Ontario Canada, M8X 2X4 Phone: 416-325-2000 Fax 416-231-5366 TSSA website Ontario application form must be used for all registrations Ontario statutory declaration form must be used for all fitting registrations Summary of Registration Requirements: Pressure Vessel - 2 sets of drawings with Ontario P.Eng stamp, 1 set of design calculations, application form Fitting - 2 sets of drawings, 1 set of design calculations, 2 original notarized statutory declaration forms, application form. Piping? Pressure vessel drawings must be stamped with an Ontario professional engineer's stamp. This rule is enforced by the TSSA. Rates: Standard - $150/hour 6-8 weeks typically Expedited - $300/hour 1-2 weeks typically |
|
Quebec |
Service de l'inspection de la fabrication D'appareils sous pression 545, boulevard Crémazie est, 4 ème étage Montréal, Quebec Canada, H2M 2V2 Phone: 514-873-6459 or 1-866-262-2084 Fax: 514-873-9936 La Régie du bâtiment website English: Pressure Vessels Page Many of the employees are bilingual in French and English. Note: Officially, vessel drawings must be stamped by a Quebec professional engineer. This rule is not enforced. Summary of Registration Requirements: Pressure Vessel - 3 sets of drawings, 1 set of design calculations Fitting - 3 sets of drawings, 3 original notarized statutory declaration forms and 1 set of design calculations or test data. Piping is registered on site. Rates: Standard - $147/hour 14+ weeks typically |
|
New Brunswick |
See ACI Central |
|
Nova Scotia |
See ACI Central Boiler and Pressure Vessel information and link to Nova Scotia Act |
|
Prince Edward Island |
See ACI Central Prince Edward Island Act |
|
Newfoundland and Labrador |
See ACI Central Newfoundland and Labrador Act Used Vessels in Newfoundland are reviewed by the Newfoundland Government. Contact: Stephen Higdon stephen.higdon@gov.nl.ca 709-729-2747 |
|
Yukon |
See ACI Central |
|
North West Territories |
See ACI Central |
|
Nunavit |
See ACI Central |
|
ACI Central |
ACI Central, Inc. 20 McAuley Court Charlottetown, PE Canada C1A 9M7 Phone: 902-566-1975 Fax: 902-566-3133 ACI website See Province or territory for fees Ask about review rates if your project is complicated. One review fee applies to all Provinces / Territories covered by ACI Central Allow 10 working days for review. A Professional Engineer's stamp is required, but does not have to be Canadian. A purchase order and cover letter with contact information is required before review will start. A link to all ACI Pressure Vessel Application Forms can be found on their website: www.acicrn.com/ Registration Requirements for PEI, NFLD and NWT: Pressure Vessel - 2 sets of drawings with P.Eng stamp, 1 set of design calculations, Pressure Vessel Registration Form (Design Information). Fitting - PEI, NWT - 2 sets of drawings, 1 set of design calculations and 1 original notarized statutory declaration form. Fitting - NFLD - 2 sets of drawings with P.Eng stamp, 1 set of design calculations and 2 original notarized statutory declaration forms. Registration Requirements for NB, NS, Yukon and Nunavut: Pressure Vessel - 2 sets of drawings, 1 set of design calculations, Pressure Vessel Registration Form (Design Information). Fitting - 2 sets of drawings, 1 set of design calculations and 1 original notarized statutory declaration form. Rates: 4-6 weeks typically |
Fitting Requirements/P.Eng Stamp Requirements
* ACI requires a second P.Eng stamp on FEA submissions
** TSSA requires that only Ontario P. Eng. Stamps may be used for Ontario submissions
Disclaimer: While every effort is made to make these pages accurate and up to date as the CRN system changes, this information is only the opinion of Laurence Brundrett P. Eng., President of Pressure Vessel Engineering Ltd. Please consider this an introduction - the first 20% of the information you require to navigate the CRN system.